asphalt mixing plant manufacturers

Xinle Hongtai Waterproof Machinery Factory is professional asphalt mixing plant manufacturers
80t Mobile Asphalt Mixing Plant, Mobile Asphalt Plant
QLB Series (Batch Mixing Type-QLB Series)
1). Integrated design of drying and mixing in drum, reduce initiate cost for customer;
2). Accurate weighing, and stable quality;
3). Simple structure, easy operation, drying while drum rotate in counter-clockwise direction(from burner), discharging while drum rotates in clockwise direction(from burner), and the wind are swirled in the center of the drum;
4). PLC control, touch screen, auto/manual switchable;
5). Towing chassis for easy transport and installation;
6). Burner is available for coal and oil, at customer's option.

asphalt mixing plant manufacturers

welcome http://www.waterproof-machinery.com/Products/Products-2-1.html

waterproof membrane sheet manufacturers

We are waterproof membrane sheet manufacturers in china.
Type of products:
Grade: I, II
Base: 220G/M2 Polyester, Fiberglass
Top surface: PE film, al film, fine sands, mineral grains
Thickness: 2mm, 3mm, 4mm
Width: 1 m
Length: 10m/7.5m

Features:
A) APP / SBS modified bitumen waterproof membrane:
1) Conforms to the national standards
2) SBS modified bitumen waterproof membrane is specially used as Waterproof material in cold area
3) APP is specially suitable for areas of high temperature and of strong Sun - shine

PLEASE NOTE: If you want to send to an inquiry about of our products, please tell us your email, then we can contact with you as soon as possible.

waterproof membrane sheet manufacturers

welcome http://www.waterproof-machinery.com/

bituminous waterproofing membrane for construction

the manufacturer of good quality self adhesive bituminous waterproofing membrane for construction
General:
Vehicle maintenance and repair, sealing around pipes and tanks, repairs to weatherproof enclosures, sealing over wood, concrete brick most metals and some plastics.

APPLICATION:
Do not apply to very cold frosted surfaces. Trim the materials to the required length/shape allowing an overlap of at least 25 cm where the material is to be joined.On stepped flashing begin at the lowest level and work upwards.
Warming the tape using gentle indirect heat will help the adhesion and make the tape more workable in cold temperatures.Ensure that there are no air pockets.Apply even pressure over the entire surface using a non-abrasive tool e.g. cloth or hand roller.Take care not to stretch or puncture the foil during application.

Construction:
Flashing & Sealing to felt asphalt and bitumen surfaces, flashing of conservatories and porches, roof skirtings and parapet joints, sealing of skylights, vents, pipes, window sills and other openings, repair bandage for gutters and roofs, sealing glazing bars, cappings and protective coverings.

bituminous waterproofing membrane 

welcome http://www.waterproof-machinery.com

Modified Asphalt Tar APP Waterproof Membrane

Modified Asphalt Tar APP Waterproof Membrane For Road and Bridge

Storage&Shipment

APP Waterproof Membrane 

Place the membrane vertically.

Packed with strong wood pallet and covered by shrink film in case of slant

Keep away from fire during storage and transportation.

Membranes should be stored under dry and ventilated conditions in order to keep away from sunlight and raining.

NO.	Type			Type I	Type II
1	Soluble content		3mm	≧2100
			4mm	≧2900
			5mm	≧3700
2	Impermeability(0.4Mpa 30mins)			Impermeable
3	Heat resistance,2h coating suspended,℃			130±2	150±2
				No bulking,fold sliding or flow
4	Tension,N/50mm	Vertical		≧600	≧800
		Horizontal		≧550	750
5	Max. Tension%≥elongation rate	Vertical		≧25	≧35
		Horizontal		≧30	≧40
6	Low temperature flexibility/℃			-10℃	-20℃
				No crack
7	Tearing strength	Vertical		≧300	≧400
		Horizontal		≧250	≧350
8	Thermal aging	Appearance		No bulking,fold sliding or flow
		Longitudinal tension retention%		≧80
		Low temperature flexibility/℃		3	-10
				No crack

welcome http://www.waterproof-machinery.com

Modified Asphalt Tar APP Waterproof Membrane For Road and Bridge

Road construction APP waterproofing membrane to APP modified materials, supplemented by a variety of additives made of asphalt coating impregnated polyester base (PY), both sides covered with polyethylene film, or in the above sprinkle fine Sand, mineral particles made of special performance indicators and use of waterproof material. Products according to physical and mechanical properties are divided into type I and II. Type I is suitable for hot mix asphalt concrete road and deck, Type II is suitable for asphalt mastic concrete road and deck. According to the thickness of 3mm, 4mm, 5mm, width of 1000mm.

APP Waterproof Membrane

Application
It is used in asphalt concrete bridge and can also be used in asphalt concrete pavement, airport runway, asphalt concrete pavement, asphalt concrete pavement, asphalt concrete pavement Waterproof and gas barrier of the trenches, waterproofing of the parking lot roof, and other waterproofing of the carrying works.

welcome http://www.waterproof-machinery.com

Self-adhesive Bitumen Membrane Waterproofing Exporting

Self-adhesive Bitumen Membrane Waterproofing Exporting to Southeast Asia

1.Features:Self-adhesive Bitumen Waterproof Membrane
1)Self-adhesive without bonding agent and torching.
2)Good rubber elasticity and elongation.
3)Excellent adhesion bond.
4)Safe application,no pollution.
5)Excellent waerproof and high strength.
6)Corrosion resistance and ageing-resistacne.

bitumen membrane waterproofing

Use scope:Self-adhesive Bitumen Waterproof Membrane
It is widely used in non-exposed roof,underground engineeing.

Construction:Self-adhesive Bitumen Waterproof Membrane
Easy applied,as below
welcome http://www.waterproof-machinery.com/

waterproof membrane sheet manufacturers

Our company are waterproof membrane sheet manufacturers in china,The factory is strictly in accordance with international quality system to ensure product quality. Our factory pursues the enterprise culture of sincere, realistic and innovation, adheres to the service goal of honesty, customer-oriented and win-win situation. We are looking forward to cooperating with you.
HDPE Smooth GeoMembrane Description:

Smooth HDPE Geomembrane(HTPLASTIC) is a black, high quality, high density polyethylene geomembrane produced from specially formulated, virgin polyethylene resin.

The polyethylene resin is designed specifically for flexible and durable geomembrane applications, it contains approx. 98% polyethylene, 2% carbon black and trace amounts of antioxidants and heat stabilizers, dimensional stability and thermal agin characteristics, HT PLASTIC Geomembrane has excellent resistance to UV radiation and is suitable for exposed applications.

waterproof membrane sheet manufacturers

HDPE Smooth GeoMembrane Application:

Geomembrane used in groundsill of road, highway, railway and waterproof layer of swelling clay and wet collapsed loess. Geomembrane can be widely used in areas of garbage burying, waste disposal and underground construction projects. Such as below:

- aquaculture ponds
- Ouchi root barrier membrane
- Floating baffles;
- Process wastewater
- Stormwater impoundments;
- Secondary containment;
- Spill containment
- Manure and biogas tanks and covers
- Potable water tanks and covers;
- Sludge Drying beds;
- Bioremediation covers & liners;
- Leachate ponds

welcome http://www.waterproof-machinery.com/