asphalt mixing plant manufacturers

we are asphalt mixing plant manufacturers,if you need our products,pls leave us messages.
(1)Environment temperature: 20°C,standard atmospheric pressure; Local altitude should be less than 2000m;

(2)The average humidity of Cold aggregate <5%

(3)The temperature of the hot asphalt mixture <160°C

(4)The mixture is middle size, cycle time 45S, the density of stone material in the mixture≥1600kg/m3

(5)The content of fine aggregate in mixture <35%;

asphalt mixing plant manufacturers

(6) The filler proportion in the raw aggregate material should not higher than 3%.

(7)The cold aggregate must be clean, and it shouldn't include more soil and sundries. The cold aggregate supply should be continuous.

(8)The cold aggregate shouldn't include large quantity of oversize grain; otherwise it will cause jam and reduce the aggregate supply
capability.

(9)The water content in filler material should < 0.5%, and the filler shouldn't have conglomeration, agglomeration, otherwise it will
cause material supply break and time delay accordingly influence the capacity.

(10)The asphalt should be with well wrapping capability, during standard mixing circle, the aggregate should be completely

For more information,pls visit http://www.waterproof-machinery.com/Products/Products-2-1.html

asphalt waterproofing membranes

1.asphalt waterproofing membranes Features:
Pre-applied HDPE polymer waterproof membrane
1) Pre-applied:forms continuous and reliable physical bond to the poured concrete against it, which prevents water migration and reduces possibility of being affected by below-grade structure settlement.
2) Loosely-laid onto slabs:requiring no priming or fillets.

asphalt waterproofing membranes

3) Trafficable weather resistant adhesive side:can receive pedestrian or traffic immediately after application and makes convenient for subsequent placing of reinforcement, site contamination is easy to be removed.
4) Superior physical & chemical property:shock and puncture resistance, can withstand heavy duty loading, protect structure from salts and sulphate attack.
5) No butt joints:all joints have bonded "selvedge for accurate and easy overlap, to increase leak protection.

For more information,pls visit http://www.waterproof-machinery.com/About/About-1.html

bitumen waterproofing rolls

bitumen waterproofing rolls Introduction
SBS/APP modified bitumen waterproofing membrane is made by soaking the base in bitumen, or thermoplas ticityelastomer(such as styrene butadiene-SBS), or thermoplastics (such as atactic polypropylene-APP, APAO, APAL) modified bitumen, then covering double faces with elastomer(SBS)or thermoplastics(APP, APAO, APAL) modified bitumen, and last finiishing the upward face with fine sands, mineral slates(or grains) or polythene membrane etc, while downward face with fine sands or polythene membrane.

bitumen waterproofing rolls

Features:
SBS polymer provides flow resisitance at high temperatures and flexibility at low temperatures for lasting durability.
Non-woven polyester 180g/m2 reinforcement.
Designed for application in new construction,re-roofing and retrofit roofing.
Excellent tear resistance.

For more information,pls visit http://www.waterproof-machinery.com/Products/Products-2-1.html

bitumen waterproofing rolls

bitumen waterproofing rolls APPLICATION METHOD:
Make sure the roof deck smooth,clean,and dry (moisture<9%),then apply the surface of roof deck homogeneously with a kind bitumen paint,till dry to start application.
There are two methods in application.
One way is by heating and melting method.Heat the polyethylene film of the membrane and roof deck surface by heating and melting method to be nearly melted(not flowing),then install the membrane fully bonded to the roof deck with overlaps of 5-10cm.

bitumen waterproofing rolls

The other way is by cold adhesive method.Pour the cold adhesive homogeneously on the roof deck,then roll the membrane to install it to be fully sticked to roof deck.
By heating and melting method and by cold adhesive can be used in alternation in application as requested.
After application,a full serious inspection is required to sure no air bubble,no fold,no falling away.ect. To guarantee the waterproof life.

For more information,pls visit http://www.waterproof-machinery.com/Products/Products-2-1.html

waterproof roof membrane china

1. waterproof roof membrane china Introduction
Polyvinyl Chloride (PVC) waterproof membrane is a new polymer waterproof membrane which is made from polyvinyl chloride resin, and mixed with plasticizer, filler, antioxygen, ultraviolet absorber and other auxiliaries.
HONGYUAN, ranks TOP 3 in China waterproofing industry.

waterproof roof membrane china

2. Features
1)  Excellent aging resistance. Service life of roofing material is over 20 years;  
     service life of underground material is over 50 years.
2)  Root resistant penetration, specially used on planting roof.
3)  Welding installation. Joints are solid and environment friendly, no pollution.
4)  High tensile strength, good elongation and dimensional stability.
5)  Good plasticity, easy and suitable for details installation.
6)  Fireproof. Fire extinguished out of the ignition resource.
7)  Surface is smooth, no fading and dirty resistant.

4.  Applications
1)   All kinds of roofs, such as steel structure roof, planted roof etc.
2)   Underground engineering, such as building basement, subways, tunnels, air raid shelter, etc.
3)   Other projects like artificial lake, dam, water reservoir, grain storehouse, etc.

For more information,pls visit http://www.waterproof-machinery.com/

asphalt mixing plant manufacturers

we are asphalt mixing plant manufacturers,if you need our products,welcome to contact us.
8t/h - Mobile Asphalt Mixing Plant (SLB-08):
1). Type: SLB-8
2). Capacity: 8t/h
3). Power: Oil: 23.7 kw Coal: 40 kw
4). Product temperature: 120~180° C, Adjustable
5). Fuel consumption: Oil: 5~7.5 kg/t Coal: 13~15 kg/t
6). Optional: Aggregate batcher, Storage bin, Coal miller, Wet filler, Bag House, Control room, Bitumen heating tank

Main Feature:
8t/h - Mobile Asphalt Mixing Plant (SLB-08):
1). Integrated design of drying and mixing in drum, reduce initiate cost for customer;
2). Simple structure, easy operation, drying while drum rotate in counter-clockwise direction(from burner), discharging while drum rotates in clockwise direction(from burner), and the wind are swirled in the center of the drum;
3). PLC control, touch screen, auto/manual switchable;
4). Towing chassis for easy transport and installation;
5). Burner is available for coal and oil, at customer's option.

For more information,pls visit http://www.waterproof-machinery.com/Products/Products-2-1.html

asphalt waterproofing membranes suppliers

Asphalt Waterproofing Products Suppliers for Pre-applied Membrane

As unique composite sheet, which is composed of one thick HDPE backing layer, an aggressive pressure sensitive adhesive and trafficable weather resistant protective granular coating, the unique membranes realizes firm bonding to poured concrete,so that prevents water ingress or migration.

Length	15m/20m
Width	1m/2m
Thickness	1.2mm/1.5mm/1.7mm/2.0mm
Remark	Above specification can be customize.

1.Application Range:
Applied either horizontally to smoothly prepared concrete substrate and compacted earth or crushed stone substrate; or vertically to permanent formwork. Concrete is then cast directly against the adhesive side of the membranes.
1) Waterproofing to basements of industrial and civil engineering.
2) Pre-applied waterproofing system for walls, tunnels and subways.
3) The membrane is not suited to roofs or other internal wet area

For more information,pls visit http://www.waterproof-machinery.com/About/About-1.html